What is the shelf life of your lubricant products?

Our lubricants have a standard shelf life of 5 years when stored in original, unopened containers at temperatures between 10°C and 30°C. After opening, we recommend using the product within 12 months for optimal performance. Always ensure containers are properly sealed when not in use to prevent contamination.

Can different lubricant grades be mixed?

We strongly advise against mixing different lubricant grades or types as this can compromise performance. Mixing may alter viscosity characteristics, reduce additive effectiveness, and potentially cause incompatibility issues. If system contamination occurs, complete draining and flushing is recommended before adding fresh lubricant.

How often should lubricant be replaced in industrial equipment?

Replacement intervals depend on operating conditions, equipment type, and manufacturer recommendations. As general guidance: hydraulic fluids typically last 2,000-4,000 operating hours, gear oils 4,000-8,000 hours, and compressor oils 1,000-2,000 hours. Regular oil analysis can help determine optimal change intervals for your specific application.

What makes synthetic lubricants different from mineral-based ones?

Synthetic lubricants are chemically engineered to provide superior performance characteristics including wider temperature range operation, better oxidation stability, and longer service life. They flow better at low temperatures and maintain viscosity better at high temperatures compared to mineral oils. While more expensive initially, synthetics often provide better long-term value through extended drain intervals and reduced equipment wear.

How can I tell if my lubricant needs changing?

Key indicators include: darkening color, burnt odor, increased viscosity or sludge formation, elevated particle counts, or changes in acid number. For critical equipment, we recommend regular oil analysis to monitor lubricant condition. Visual inspections should check for water contamination (milky appearance) or unusual consistency changes.

Are your lubricants environmentally friendly?

We offer a range of environmentally acceptable lubricants (EALs) that are biodegradable and low in toxicity. These products meet international standards for environmental safety while still delivering high performance. Our EAL formulations are specially designed for applications where lubricant leakage could impact sensitive ecosystems.

What safety precautions should be taken when handling lubricants?

Always wear appropriate PPE including gloves and eye protection. Avoid prolonged skin contact and wash thoroughly after handling. Provide adequate ventilation in work areas. Have spill containment materials available. Never use lubricants near open flames or extreme heat sources. Store away from oxidizing agents and follow all local regulations for disposal of used lubricants.

Can your lubricants be used in food processing equipment?

We offer NSF H1 registered lubricants that are acceptable for incidental food contact. These products meet stringent purity requirements and are tasteless, odorless, and physiologically inert. They are specifically formulated for use in food processing plants, pharmaceutical manufacturing, and other applications where lubricant contamination of products must be avoided.

How should I dispose of used lubricant?

Used lubricant must be disposed of in accordance with local environmental regulations. Never pour lubricants down drains or onto the ground. Many areas have recycling programs for used oils. We recommend working with licensed waste management companies who can properly handle and recycle used lubricants. Keep detailed records of disposal for environmental compliance purposes.